TM 55-1520-240-23-9
11-51
RIG FIRST AND SECOND STAGE BELLCRANKS
(Continued)
11-51
14.
Remove cotter pin (38), nut (39), and washer
(40) from bolt (41). Lift bolt (41) from bellcrank
(34) to release link (43). Move bellcrank aft.
15.
Repeat step 14 for three links (44, 45, and 46)
in bellcranks (33, 35, and 36).
16.
Install pin (31) through support (32), four
bellcranks (33, 34, 35, and 36), and hole (37) in
structure.
17.
Loosen nut (47) on link (43).
18.
Adjust rod end (48) of link (43). Turn rod end
until bolt (41) can be installed in bellcrank (34)
and link.
19.
Install washer (40) and nut (39) on bolt (41). Do
not torque nut at this time.
20.
Repeat steps 17, 18, and 19 for three links (44,
45, and 46) and bellcranks (33, 35, and 36).
11-219