TM 55-1520-240-23-9
11-50
RIG DASH ACTUATOR FOR HOVER (Continued)
11-50
21.
Repeat steps 17 and 18.
22.
Remove electrical power.
23.
Connect two connectors (12 and 13) to
receptacles (17 and 18) of DASH actuator (8).
INSPECT
24.
Apply electrical power.
25.
Deleted.
26.
Deleted.
27.
Have pilot hover aircraft crosswind. Check
stick position indicator (3). Indication shall be
within one quarter division on either side of N. If
within limit, go to Follow-On Maintenance. If not,
perform step 29, then repeat step 27.
28.
Repeat steps 1 thru 18, then repeat steps 22
thru 27.
28.1. Have pilot land aircraft.
11-214
Change 1