TM 55-1520-240-23-9
11-27
REMOVE DASH ACTUATOR DUMMY LINK
11-27
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Equipment Conditions:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
1.
Remove nut (1), three washers (2, 3, and 4),
bushing (5), and bolt (6) from pitch transfer
bellcrank (7). Disconnect dummy link (T42) (8)
from bellcrank.
2.
Install bolt (6), three washers (4, 3, and 2), and
nut (1) loosely in bellcrank (7).
3.
Remove nut (9), three washers (10, 11, and 12),
bushing (13), and bolt (14) from ILCA bellcrank
(15). Remove dummy link (T42) (8).
4.
Install bolt (14), three washers (12, 11, and 10),
and nut (9) loosely in bellcrank (15).
FOLLOW-ON MAINTENANCE:
Install DASH actuator (Task 11-164).
END OF TASK
11-94
