TM 55-1520-240-23-9
11-29
REMOVE SERVOCYLINDER SAFETY BLOCKS
(Continued)
11-29
2.
Working from left forward work platform, loosen
screw (3) of safety block (T31) (4).
3.
Rotate latch (5) up. Remove block (4) from piston
(6) of servocylinder (7).
4.
Repeat steps 2 and 3 for right forward
servocylinder and aft right and left servocylinders.
5.
Have helper in cockpit, press trigger switch (1)
and lower grip (2) to detent position. Release
switch.
FOLLOW-ON MAINTENANCE:
Remove hydraulic power.
Remove electrical power.
Close forward and aft work platforms (Task 2-2).
END OF TASK
11-98
