TM 55-1520-240-23-7
9-103
REMOVE CONSOLE COMPONENTS
(Continued)
9-103
7.
On helicopters without 74 , disassemble EMERG
ENG TRIM panel as follows:
a.
Open two switch guards (15). Remove nut
(16) and washer (17) from switch guards.
Remove switch guards.
b.
Remove two lens (18) from panel (19).
c.
Remove two lamps (20) from lens (18).
d.
Remove two screws (21) from panel (19).
Remove panel.
e.
Loosen four fasteners (22) on panel (23). Lift
EMERG ENG TRIM panel from console (24).
NOTE
Do not lift panel by switches.
f.
Tag (E264) eight wires (25). Remove wires
from four switches (26) by removing screws
(27) and washers (28). Tape (E385) ends
of wires.
g.
Remove nuts (29), lock rings (30), and
lockwashers (31) from switches (26).
Remove switches.
h.
Tag (E264) four wires (32) on two lamp
receptacles (33). Desolder wires from
receptacles. Tape (E385) ends of wires.
i.
Remove nuts (34) and washers (35) from
receptacles (33). Remove receptacles.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-416
