TM 55-1520-240-23-7
9-104
INSTALL CONSOLE COMPONENTS
(Continued)
9-104
2.
Install pilots lighting transformer as follows:
WITHOUT 17
a.
Position transformer 122T1 (10) in console
(2). Install four screws (11) and washers (12).
b.
Remove tape and install three wires (13)
by soldering to terminals (14). Use solder
(E360). Remove tags.
WITH 17
c.
Position transformer 310-18742-01 (10) in
console (2). Install four screws (11) and
washers (12).
d.
Remove tape and connect three wires (13)
by using screws (14.1) and washers (14.2).
Remove tags.
e.
Position panel (8) on console (2). Tighten
seven fasteners (9).
INSPECT
NOTE
If no other components are
being installed, go to Follow-On
Maintenance.
3.
Install terminal board module as follows:
a.
Install module (15) (Task 9-166).
b.
Position panel (8) on console (2). Tighten
seven fasteners (9).
INSPECT
NOTE
If no other components are
being installed, go to Follow-On
Maintenance.
9-418