TM 55-1520-240-23-7
9-103
REMOVE CONSOLE COMPONENTS
(Continued)
9-103
3.
Loosen seven fasteners (1). Remove panel (2).
NOTE
Procedure is same to remove pilot
or copilot lighting transformer. Pilot’s
lighting transformer is shown here.
4.
Remove pilot’s lighting transformer as follows:
WITHOUT 17
a.
Tag and disconnect three wires (9) by
unsoldering from terminal (10). Tape wire
ends. Use tape (E385).
b.
Remove four screws (11) and washers (12).
c.
Remove transformer 122T1 (13).
WITH 17
d.
Tag and disconnect three wires (9) by
removing screws (9.1) and washers (9.2)
from terminal (10). Tape wire ends. Use tape
(E385).
e.
Remove four screws (11) and washers (12).
f.
Remove transformer 310-18742-01 (13).
5.
Loosen seven fasteners (1). Remove panel (2).
NOTE
Procedure is same to remove any
terminal board module.
6.
Remove module (14) (Task 9-165).
9-415
