TM 55-1520-240-23-7
9-100
INSTALL OVERHEAD PANEL PANELS
(Continued)
9-100
FUEL CONTROL PANEL
7.
Install FUEL CONTROL panel (54) as follows:
a.
Position panel (54) on panel (2). Tighten six
screws (55).
b.
Remove tape. Connect and solder 17 wires
(56) to eight lamps (57). Remove tags.
c.
Remove tape. Connect 35 wires (58) to 10
switches (59) by installing washers (60) and
screws (61). Remove tags.
INSPECT
NOTE
If no other panels are to be installed,
go to step 13.
9-395