TM 55-1520-240-23-7
9-100
INSTALL OVERHEAD PANEL PANELS
(Continued)
9-100
HYDRAULIC PANEL
12.
Install HYDRAULIC panel (86) as follows:
a.
Position panel (86) on panel (2). Tighten four
screws (87).
b.
Remove tape. Connect and solder seven
wires (88) to four lamps (89). Remove tags.
c.
Remove tape. Connect 15 wires (90) to five
switches (91) by installing washers (92) and
screws (93). Remove tags.
INSPECT
NOTE
If no other panels are to be installed,
go to step 13.
9-399
