TM 55-1520-240-23-7
9-100
INSTALL OVERHEAD PANEL PANELS
(Continued)
9-100
ANTI-ICE PANEL
2.
Install ANTI-ICE panel as follows:
a.
Position panel (6) on panel (2). Tighten four
screws (7).
b.
Remove tape. Connect and solder three
wires (8) to three lamps (9). Remove tags.
Use solder (E360).
c.
Remove tape. Connect 10 wires (10) to 5
switches (11) by installing washers(12) and
screws (13). Remove tags.
INSPECT
NOTE
If no other panels are to be installed,
go to step 13.
9-390
