TM 55-1520-240-23-7
9-98.5
INSTALL OVERHEAD PANEL MODULE
9-98.5
INITIAL SETUP
Applicable Configurations:
With 17
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Contact Insertion/Removal Tool, M83723-31-30
Materials:
None
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
Wires must not touch moving
components. Damage to wires or a
short circuit can result.
NOTE
If a click is not heard, module is not
seated.
1.
Remove tape from wires (3).
2.
Install wires (3) in module (1). Use a
contact/insertion removal tool. Remove tags.
INSPECT
3.
Install module (1) by pressing it into terminal rail
(2) until a click is heard.
4.
Raise panel (4). Install two bolts (5) and washers
(6).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
END OF TASK
9-352