TM 55-1520-240-23-7
9-98.4
REMOVE OVERHEAD PANEL MODULE
9-98.4
INITIAL SETUP
Applicable Configurations:
With 17
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Contact Insertion/Removal Tool, M83721-31-20
Module Extraction Tool CTJ-ROO
Materials:
Paper Tags (E264)
Tape (E385)
Personnel Required:
Aircraft Electrician
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
1.
Remove two bolts (1) and washers (2) from panel
(3). Lower panel.
2.
Tag and remove wires (4) from module (5). Use
contact insertion/removal tool.
3.
Tape wire ends. Use tape (E385).
4.
Remove module (5) from terminal rail (6). Use
module extraction tool.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-351
