TM 55-1520-240-23-7
9-98.2
INSTALL OVERHEAD PANELS IN PANEL
(Continued)
9-98.2
FUEL CONTR PANEL
8.
Install FUEL CONTR panel (70) as follows:
a.
Position panel (70) on panel (2). Tighten six
screws (71).
b.
Remove tape. Connect wire (72) to
receptacle (73) by installing washer (74) and
screw (75). Remove tag.
c.
Remove tape. Connect wire (76) to
receptacle (73). Remove tag.
d.
Remove tape. Connect 40 wires (77) to 10
switches (78) and five receptacles (79) by
installing washers (80) and screws (81).
Remove tags.
e.
Remove tape. Connect and solder six wires
(82) from two receptacles (83). Use solder
(E360). Remove tags.
INSPECT
NOTE
If no other panels are to be replaced,
go to step 15.
9-337
