TM 55-1520-240-23-7
9-98.2
INSTALL OVERHEAD PANELS IN PANEL
(Continued)
9-98.2
EXT LTG PANEL
4.
Install EXT LTG panel (27) as follows:
a.
Position panel (27) on panel (2). Tighten four
screws (28).
b.
Remove tape. Connect two wires (29) to
switch (30). Remove tags.
c.
Remove tape. Connect six wires (31) to four
resistors (32) by installing washers (33) and
screws (34). Remove tags.
d.
Remove tape. Connect wire (35) to
receptacle (37). Remove tags.
e.
Remove tape. Connect 18 wires (37) to
four switches (38) and one receptacle (36)
by installing washers (39) and screws (40).
Remove tags.
INSPECT
NOTE
If no other panels are to be replaced,
go to step 15.
9-333