TM 55-1520-240-23-7
9-98.2
INSTALL OVERHEAD PANELS IN PANEL
(Continued)
9-98.2
LTG PANEL
3.
Install LTG panel (14) as follows:
a.
Position panel (14) on panel (2). Tighten four
screws (15).
b.
Remove tape. Connect four wires (16) to
transformer (17) by installing washers (18)
and nuts (19). Remove tags.
c.
Remove tape. Connect one wire (20) to
receptacle (21). Remove tags.
d.
Remove tape. Connect and solder four
wires (22) to potentiometer (23). Use solder
(E360). Remove tags.
e.
Remove tape and install wire (24) to
receptacle (21) by installing washer (25) and
screw (26). Remove tags.
INSPECT
NOTE
If no other panels are to be replaced,
go to step 15.
9-332