TM 55-1520-240-23-7
9-98.2
INSTALL OVERHEAD PANELS IN PANEL
(Continued)
9-98.2
TROOP WARN/HTG PANEL
6.
Install TROOP WARN/HTG panel (52) as follows:
a.
Position panel (52) on panel (2). Tighten four
screws (53).
b.
Remove tape. Connect wire (54) to
receptacle (55). Remove tags.
c.
Remove tape. Connect and solder six wires
(56) to switch (57). Use solder (E360).
Remove tags.
d.
Remove tape. Connect 26 wires (58) to
eight switches (59) and one receptacle (55)
by installing washers (60) and screws (61).
Remove tags.
INSPECT
NOTE
If no other panels are to be replaced,
go to step 15.
9-335
