TM 55-1520-240-23-7
9-98.2
INSTALL OVERHEAD PANELS IN PANEL
(Continued)
9-98.2
Wires must not touch moving
components; otherwise damage to
wires or fire can result.
ENG COND PANEL
1.
Install ENG COND panel (1) as follows:
a.
Position panel (1) on panel (2). Tighten four
screws (3).
b.
Connect two electrical connectors (4) to two
engine controls (5). Remove tags.
INSPECT
NOTE
If no other panels are to be installed,
go to step 15.
9-330