TM 55-1520-240-23-7
9-160
ASSEMBLE WINCH CONTROL GRIP (AVIM)
(Continued)
9-160
12.
Position insulator (29), switch (30), and plate (31)
in handle. Install two screws (32).
13.
Solder two wires (33) to switch (30). Remove
tags. Tie wires where they run past gears using
twine (E433). Coat switch connection with
varnish (E435). Wear gloves (E186).
NOTE
Cargo hook release guard (E311,
APP E) must be installed on winch
control grips that do not have a raised
guard as part of the retainer and
guard assy (37).
14.
Position two switches (34 and 35), bushing (36)
and retainer (37) and cargo hook release switch
guard (E311, APP E), if required, in housing (38).
Install three screws (39).
15.
Position housing (38) on plate (2). Install two
screws (40).
16.
Position plate (2) on left handle (41). Install
screws (42).
17.
Solder three wires (43) to switch (34). Remove
tags. Coat switch connections with varnish
(E435). Wear gloves (E186).
18.
Solder two wires (44) to switch (35). Remove
tags. Coat switch connections with varnish
(E435). Wear gloves (E186).
19.
Solder five wires (45) to switch (1). Remove tags.
Coat switch connections with varnish (E435).
Wear gloves (E186).
20.
Position switch (46), bracket (47), and plate (48)
to handle (41). Install screw (49).
21.
Solder two wires (50) to switch (46). Remove
tags. Coat switch connections with varnish
(E435). Wear gloves (E186).
9-641
