TM 55-1520-240-23-7
9-159
DISASSEMBLE WINCH CONTROL GRIP (AVIM)
(Continued)
9-159
23.
Remove screw (45) from knob (46). Remove
knob.
24.
Remove three screws (47) and gear (48).
25.
Remove screw (49) and washer (50).
26.
Remove screw (51) and washer (52). Remove
plate (53).
27.
Remove two screws (54) from bearing (55).
Remove bearing.
28.
Remove screw (56). Remove bushing (57) and
spring (58) from shaft (59).
29.
Remove nut (60) and washer (61). Remove
switch (20).
30.
Tag and unsolder two wires (62) from switch (63).
31.
Remove two screws (64). Remove plate (65),
switch (63) and insulator (66).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-638