TM 55-1520-240-23-6
7-231
REMOVE BRAKE TRANSFER VALVE
(Continued)
7-231
NOTE
To remove outboard brake transfer
valve, perform steps 1 thru 3. To
remove inboard brake transfer valve,
perform steps 4 thru 6.
OUTBOARD VALVE
1.
Operate cockpit foot brake pedals ten times to
relieve system pressure.
1.1.
Disconnect three hydraulic tubes (1) from valve
(2). Use cloths (E135) for spilled fluid. Use
gloves (E186).
2.
Remove three screws (3), six washers (4), and
three nuts (5). Remove valve (2).
3.
Remove three nipples (6) and packings (7) from
valve (2).
INBOARD VALVE
4.
Operate cockpit foot brake pedals ten times to
relieve system pressure.
4.1.
Disconnect three hydraulic tubes (8) from valve
(9). Use cloths (E135) for spilled fluid. Use
gloves (E186).
5.
Remove three screws (10), six washers (11),
and three nuts (12). Have helper hold screw
heads from turning when removing nuts. Use
screwdriver.
6.
Remove valve (9).
7-872