TM 55-1520-240-23-6
7-229
INSTALL OUTBOARD BRAKE MASTER CYLINDER
7-229
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-3234692
Torque Wrench, 30 to 150 Inch-Pounds
Materials:
None
Parts:
Preformed Packings
Cotter Pins
Washers
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
NOTE
Procedure is same to install pilot’s
or copilot’s outboard cylinder. Pilot’s
cylinder is shown here.
1.
Install three washers (1), packings (2), and
elbows (3) in cylinder (4). Do not tighten nuts (5).
1.1.
Install scupper (5.1) on cylinder (4).
7-867
