TM 55-1520-240-23-6
7-229
INSTALL OUTBOARD BRAKE MASTER CYLINDER
(Continued)
7-229
2.
Position cylinder (4) in upper mount (6).
3.
Install bolt (7) with head outboard washer (8),
washer (9), and nut (10). Torque nut 30 to 60
inch-pounds. Install cotter pin (11).
4.
Position cylinder (4) in lower mount (12).
5.
Install washer (13), bolt (14) with head outboard
washer (15), and nut (16). Torque nut 30 to 60
inch-pounds. Install cotter pin (17).
6.
Connect BRAKE hose (18). Remove tag.
7.
Connect PRESS hose (19). Remove tag.
8.
Connect RET hose (20). Remove tag.
9.
Tighten three nuts (5).
INSPECT
NO BREAK - WORK HARDER
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
Bleed brake hydraulic system (Task 7-330).
Perform operational check of brake master cylinder
(TM 55-1520-240-T).
END OF TASK
7-868