TM 55-1520-240-23-6
7-230
INSTALL INBOARD BRAKE MASTER CYLINDER
(Continued)
7-230
2.
Position cylinder (3) in upper mount (4).
3.
Install washer (5), bolt (6) with head inboard,
washer (7), and nut (8). Torque nut 30 to 60
inch-pounds. Install cotter pin (9).
4.
Position cylinder (3) in lower mount (10).
5.
Install washer (11), bolt (12) with head inboard,
washer (13), and nut (14). Torque nut 30 to 60
inch-pounds. Install cotter pin (15).
6.
Connect BRAKE hose (16). Remove tag.
7.
Connect PRESS hose (17). Remove tag.
8.
Connect RET hose (18). Remove tag.
NO BREAK - WORK HARDER
NO BREAK - WORK HARDER
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
Bleed brake hydraulic system (Task 7-330).
Perform operational check of brake master cylinder
(TM 55-1520-240-T).
END OF TASK
7-870