TM 55-1520-240-23-6
7-215
ASSEMBLE UTILITY RESERVOIR/COOLER (AVIM)
(Continued)
7-215
1.
If strap mount (1 or 2) was removed from
reservoir (3). Install as follows:
a.
Slide strap mounts (1 or 2) over timing clamp
(3) and onto reservoir (4).
b.
Align notch in strap mount (1 and 2) with
timing clamp (3).
Improper torque will crack clamps.
c.
Use deep socket to alternately tighten nuts
on each side of strap mount (1 or 2). Torque
strap mount nuts to 50 to 60 inch-pounds.
2.
Measure length of thread extending through the
nuts on each side of strap mount (1 or 2). Length
shall be 0.75 to 0.95 inch.
3.
Install packing (5) on nipple (6).
4.
Install nipple (6) in reservoir (4).
5
Install packing (7) on cooler (8).
6.
Install two packings (9) on short return tube (10).
7.
Install short return tube (10), pin (11), and cotter
pin (12) in cooler (8).
7-816