TM 55-1520-240-23-6
7-212
REMOVE UTILITY RESERVOIR/COOLER
(Continued)
7-212
10.
If reservoir/cooler (3) is being replaced do the
following:
a.
Remove lockwire from two screws (13).
b.
Remove two screws (13), valve (7) and
packing (14). Use cloths (E135) for spilled
fluid. Use gloves (E186).
c.
Remove lockwire from valve (15), switch (16),
and bulb (17).
d.
Remove valve (15), two packings (18), and
two retainers (19). Use cloths (E135) for
spilled fluid. Use gloves (E186).
e.
Remove switch (16) and packing (20). Use
cloths (E135) for spilled fluid. Use gloves
(E186).
f.
Remove bulb (17) and packing (21). Use
cloths (E135) for spilled fluid. Use gloves
(E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-809