TM 55-1520-240-23-6
7-134
INSTALL AFT SWIVELING SERVOCYLINDER
(Continued)
7-134
NOTE
All overhauled actuators must have a
suffix "N" behind the serial number.
(Suffix "N" indicates the actuator has
been adjusted in accordance with TB
1-1520-240-20-85, this is not required
on new actuators.)
1.
Install valve (1) and packing (2) in servocylinder
(3).
2.
Install valve (4) and packing (5).
3.
Install tee (6) and packing (7). Do not tighten
nut (8) at this time.
4.
Install tee (9) and packing (10). Do not tighten
nut (11) at this time.
5.
Install elbow (12) and packing (13).
6.
Install elbow (14) and packing (15).
7.
Slide clamp (16) on servocylinder (3).
8.
Slide clamp (17) on servocylinder (3).
9.
Connect tube (18) to tee (6), and valve (1).
Remove tag.
10.
Position clamp (16) on clamp (19). Install screw
(20), washer (21), and nut (22). Tighten nut (8).
11.
Connect tube (23) to tee (9) and valve (4).
Remove tag.
12.
Position clamp (17) on clamp (24). Install screw
(25), washer (26), and nut (27). Tighten nut (11).
7-603
