TM 55-1520-240-23-6
7-130
REPAIR SWIVELING SERVOCYLINDER (AVIM)
(Continued)
7-130
MOUNTING LUG BEARINGS
1.
Remove two screws (1), washers (2), and nuts
(3) from two clamps (4 and 5). Remove two
clamps (5).
2.
Tag and disconnect two tubes (6).
3.
Install caps (7) on nipples (8) and tee (9).
NOTE
Procedure is same to remove or install
upper mounting lug bearing, except
where noted in text. Lower mounting
bearing is shown here.
4.
Remove four rivets (10) from two plates (11).
NOTE
Upper mount bearing plates are
installed with screws.
5.
Remove two plates (11) from servocylinder (12).
6.
Remove bearing (13) from mount (14). Use
arbor press.
7-585
