TM 55-1520-240-23-6
7-130
REPAIR SWIVELING SERVOCYLINDER (AVIM)
(Continued)
7-130
PISTON RODS
15.
Remove caps (7) from nipples (8) and tees (9).
16.
Hold housing (20) and pull housing (22) until
piston rods (23) are extended about 12 inches.
17.
Check piston rods (23). Chromed surface must
not be worn or scored through to plating surface.
18.
Connect two tubes (6). Remove tags.
19.
Install two clamps (5) on housing (20).
20.
Position two clamps (5) to two clamps (6). Install
two spacers (3), two screws (1), and two nuts (4).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform inspect servocylinder bearing for radial and
axial play (Task 7-128).
END OF TASK
7-588