REPAIR SWIVELING SERVOCYLINDER (AVIM)
MOUNTS AND VALVE AND CYLINDER HOUSINGS
Remove nicks, scratches, corrosion, and pitting
by filing, burnishing, honing, polishing, or hand
stoning within the following limits.
Repair of mounts (14 and 18), valve (19),
and cylinder (20) housing surfaces must not
be more than a depth of 0.040 inch or 10
percent of material thickness, whichever is
Repaired areas must clear holes and radii a
minimum of 0.750 inch.
Cadmium solution (E361) is extremely
toxic. It can irritate skin and cause
burns. Use only with adequate
ventilation. Do not inhale. Do not
contact eyes, skin, or clothing. In
case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
Apply cadmium solution (E361) (Spec QQ-P-416)
with brush (E86) on repaired surfaces (14, 18,
19, and 20). Wear gloves (E184.1).
Alodine (E65) is an oxidizer. Discard
cloths which contain this material in a
separate container. If discarded with
cloths contaminated with acetone,
MEK, or other organic solvents,
combustion can result. In case of
contact, immediately flush skin or eyes
with water for at least 15 minutes.
Get medical attention for eyes.
Apply alodize (E65) (Spec MIL-C-5541) to end
caps (21), and spring housing (22) damaged
surfaces. Wear gloves (E184.1).