TM 55-1520-240-23-6
7-88.2
INSTALL EXTENSIBLE LINK SELF FEEDBACK TRANSDUCER (AVIM)
7-88.2
INITIAL SETUP
Applicable Configurations:
All
Tools:
Hydraulic Repairer’s Tool Kit, NSN 5180-00-323-4891
Torque Wrench, 30 to 150 Inch-Pounds
Contact Removal/Insertion Tool, M83723/20
Contact Removal/Insertion Tool, M81969/1402
Crowfoot, 1-1/4 Inch
Materials:
None
Personnel Required:
Aircraft Pneudraulics Repairer
Avionic Navigation and Flight Control Equipment
Repairer
Inspector
References:
TM 55-1520-240-23P
Task 7-101
NOTE
Installation of transducer can be
performed on No. 1 or No. 2
extensible link installed on actuator
or with extensible link removed from
actuator. No. 2 extensible link on
actuator is shown.
Do not bend transducer.
1.
Install self feedback transducer (1) in extensible
link body (2) until threads (3) engage, then turn
clockwise 8 turns.
7-360
