TM 55-1520-240-23-5
6-31.2
REPAIR ONE-PIECE ENGINE DRIVE SHAFT (REMOVED)
(Continued)
6-31.2
INSPECT
Epoxy primer (E292 or E293) is
flammable and toxic. Avoid inhaling.
Use only with adequate ventilation,
away from heat or open flame. In
case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
7.
Touch up shaft (2) as needed with two coats
of epoxy primer (E292 or E293). Touch up
adapters (4 and 5), on polished areas only, with
epoxy primer (E292 or E293) and epoxy topcoat
(E166). Wear gloves (E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-101
