TM 55-1520-240-23-5
6-32
INSTALL ENGINE DRIVE SHAFT (Continued)
6-32
CAUTION
Do not allow bolts to turn. If bolts turn,
bolts, plates, or adapter assembly can
be damaged.
NOTE
If nuts do not meet friction torque,
they must be replaced.
11.
Hold head of bolts (11 and 13) with wrench.
Check nuts (9 and 15) for friction torque of at
least 10 inch-pounds. Torque nuts to 440
inch-pounds. After both adapter assemblies
have been installed, ensure that the adapter
assembly nuts (9) (3 nuts per adapter assembly)
are torqued to 440 inch-pounds.
Change 1
6-104.1/(6-104.2 blank)