TM 55-1520-240-23-4
5-81.3
REPAIR LIGHTNING PROTECTION STRIP UNBONDING
5-81.3
INITIAL SETUP
Applicable Configurations:
All
Tools:
Airframe Repairer’s Tool Kit, NSN 5180-00-323-4876
Heat Lamp
Scissors
Shim, 0.005 Inch Thick
Shot Bags
Trip Balance, NSN 6670-00-401-7195
Materials:
Abrasive Paper (E9)
Acetone (E20)
Adhesive (E40, E41 or E47.1)
Aluminum Foil (E66)
Chalk (E11)
Cloth (E120)
Gloves (E186)
Naphtha, Aliphatic (E245)
Peel Ply (E270)
Polyethylene Cup (E157)
Rubber, 1/4 Inch Thick (E321)
Squeeze Bottle (E366)
Teflon Tape (E399)
Temperature Indicating Strips (E413)
Wood Spatula (E424)
Curing Agent (E158.1)
Personnel Required:
Aircraft Structural Repairer
Medium Helicopter Repairer (3)
Inspector
Equipment Condition:
Off Helicopter Task
General Safety Instructions:
Adhesive (E40, E41, E47.1) is
toxic. It can irritate skin and cause
burns. Avoid inhaling. Use only with
adequate ventilation. Avoid contact
with skin, eyes, or clothing. In case
of contact, immediately flush skin
or eyes with water for at least 15
minutes. Get medical attention for
eyes.
5-474
