TM 55-1520-240-23-4
5-48.8
REMOVE DROOP STOP SHROUD ASSEMBLIES
(Continued)
5-48.8
REMOVE BASE
3.
Remove four bolts (5) and washers (6) from
shroud base (7).
4.
Remove lockwire from bolts (8 and 9). Remove
bolt (9) and washer (10).
NOTE
Make sure bushings (14) have molded
rubber liner installed.
5
Remove two cotter pins (11), nuts (12) washers
(13), and bushings (14) from shaft (15).
6.
Slide droop stop shroud base (16) from shaft
(15) through slots (17). Remove base.
5-219