TM 55-1520-240-23-4
5-46
INSTALL HORIZONTAL HINGE PIN, PITCH-VARYING HOUSING, AND PIN BEARINGS
5-46
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairer’s Tool Kit, NSN
5180-01-375-6928
Aircraft Maintenance Tool Kit, NSN 5180-00-323-5114
Bearing and Seal Pusher (T6)
Torque Wrench, 5-50 Inch-Pounds
Torque Wrench, 700-1600 Inch-Pounds
Bolt, 3/8 Inch x 24 Thread x 5 Inches
Electric Heat Gun
Materials:
Solvent (E162)
Cloth, Cleaning (E120)
Lubricating Oil (E254/E254.1)
Lockwire (E231)
Grease (E190)
Antiseize Compound (E75)
Gloves (E186)
Temperature Indicating Strips (E413)
Sealant (E470)
Kevlar Gloves (E187)
Goggles (E473)
Parts:
Packings
Personnel Required:
Aircraft Powertrain Repairer (2)
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
WARNING
Oil (E254/E254.1) is a skin irritant, if
oil gets on skin, wash thoroughly. If oil
soaks into clothes, change clothes
immediately. Oil gives off fumes that
can cause injury to personnel. Use in
a well-ventilated area.
Change 2
5-197
