TM 55-1520-240-23-3
4-121
ASSEMBLE ENGINE DROOP ELIMINATOR VARIABLE RESISTORS
(Continued)
4-121
4.
Position two resistors (4 and 6) together. Install
three screws (9), washers (10), and nut (11).
5.
Install two nuts (12) and two washers (13) on
resistor shafts (5 and 14).
6.
Position link (15) on shafts (5 and 14). Install
four washers (16) and two nuts (17) on resistor
shafts (5 and 14).
NOTE
Do not tighten nuts at this time.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-423
