TM 55-1520-240-23-10
16-59.16 REMOVE AN/ALE-47 DISPENSER ASSEMBLY (Continued)
16-59.16
4.
Remove two bolts (8), washers (9), and nuts
(10) from outboard ends of dispenser assembly
mount arms (7).
5.
Disconnect electrical plug (11) from dispenser
assembly connector (5).
6.
Remove four bolts (14) and washers (13) from
dispenser assembly (12); remove dispenser
assembly (12) from dispenser assembly mount
(6).
NOTE
If dispenser is not going to be
installed, perform step 7.
7.
Reinstall two bolts (8), washers (9), and nuts
(10) into outboard ends of dispenser assembly
mount arms (7).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
Change 1
16-250.33
