TM 55-1520-240-23-10
16-59.13 INSTALL AN/ALE-47 PAYLOAD MODULE (Continued)
16-59.13
NOTE
Procedures to install all four payload
modules are the same.
1.
Position payload module (2) into dispenser
assembly (3).
2.
Torque bolts (1) to 40-50 inch-pounds evenly
to ensure payload module is properly seated in
dispenser assembly.
3.
Perform bonding check of electrical components
per Task 16-59.28.
WARNING
Keep face and hands away from front
of payload module during removal.
Failure to comply may result in death
or injury to personnel.
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of countermeasures
dispenser system (TM 55-1520-240-T).
END OF TASK
Change 1
16-250.25
