TM 55-1520-240-23-10
16-59.11 INSTALL AN/ALE-47 SAFETY SWITCH
16-59.11
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electronic Equipment Tool Kit,
NSN 5180-00-064-5178
Materials:
None
Personnel Required:
Avionics Mechanic
Inspector
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
1.
Position AN/ALE-47 safety switch (5) into
mounting bracket (4) and secure in place with
three screws (2) and washers (3).
2.
Perform bonding check of electrical components
per Task 16-59.28.
3.
Remove caps and connect two electrical
connectors (6) to J1 and J2 receptacles on
AN/ALE-47 safety switch (5). Remove tag.
4.
Install safety pin (1) in safety switch (5).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of countermeasures
dispenser system (TM 55-1520-240-T).
END OF TASK
Change 1
16-250.21
