TM 55-1520-240-23-10
16-7.1
ASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-7.1
41.
Position cover (98) on former (13). Install four
screws (99) and washers (100). Install screw
(99), washer (100), plate (101), and strap (85).
42.
Install bolt (102), washer (103), and bracket
(104) with two washers (105) between cover (98)
and bracket (104).
NOTE
Guard will be removed prior to
installation. It is temporarily installed
to prevent loss of hardware.
43.
Position two washers (106) between guard (91)
and former (13). Temporarily install bolt (107)
and washer (108) through bracket (104).
44.
Install screw (109), spacer (110), clamp (111),
washer (112), and nut (113) on cover (98).
45.
Temporarily install two screws (114), bracket
(115), clamp (116), washers (117), and nuts
(120) on guard (91).
46.
Temporarily install screw (121), clamp (122),
washer (123), and nut (124) on guard (91).
INSPECT
FOLLOW-ON MAINTENANCE:
Test center cargo hook (Task 16-7.1.1).
Adjust switches (Task 16-7.2).
END OF TASK
16-66
