TM 55-1520-240-23-10
16-7.1
ASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-7.1
27.
Install two eyebolts (60), washers (61), and nuts
(62) in formers (13 and 14).
28.
Position cams (63 and 64), rounded surface
facing toward synchronizing tube (50), on
squared section of shaft (33).
29.
Install levers (65 and 66), washers (67), and two
nuts (68) on shaft (33).
30.
Connect two springs (69) to eyebolts (60) and
levers (65 and 66).
16-63
