ASSEMBLE CENTER CARGO HOOK AVIM (Continued)

ASSEMBLE CENTER CARGO HOOK AVIM

ASSEMBLE CENTER CARGO HOOK AVIM (Continued) - TM-55-1520-240-23-10_461

TM-55-1520-240-23-10 UH-1H/V and EH-1H Aircraft Manual
Page Navigation
421

TM 55-1520-240-23-10 16-7 ASSEMBLE CENTER CARGO HOOK AVIM (Continued) 16-7 Do not hammer bearings into formers. Damage to bearings and formers will result. 4. Install bearings (10 and 11) in formers (12 and 13) (TM 55-1500-322-24). Use arbor press. 5. Install bracket (14) with two washers (15) and two bolts (16) on former (12). 6. Install two stops (17) with two washers (18) and two bolts (19) on formers (12 and 13). 7. Install two cam stops (20) with four washers (21) and four bolts (22) on formers (12 and 13). 8. Position two cam roller bearings (23) in forks of two cams (24 and 25). Install two cam bearing pins (26) and cotter pins (27). Cams and cam plates must be installed correctly or cargo hook will not function. 9. Install two cams (24 and 25), two cam plates (28), and six bolts (29) on formers (12 and 13). 16-52

Privacy Statement
Press Release
Contact