TM 55-1520-240-23-10
16-7
ASSEMBLE CENTER CARGO HOOK AVIM
(Continued)
16-7
33.
Install switch (73), two washers (74), and nut
(75) in bracket (6).
34.
Install switch (76), two washers (77), and nut
(78) in bracket (14).
NOTE
Switches are lockwired after
adjustment (Task 16-7.2).
35.
Position cover (79) on former (13). Install six
screws (80), washers (81), bracket (82), plate
(83), and strap (84).
36.
Install hose (85) on actuating cylinder (2).
NOTE
Guard will be removed prior to
installation. It is temporarily installed
to prevent loss of hardware.
37.
Position guard (86) on formers (12 and 13).
Temporarily install bolts (87 and 88), washers
(89), and clamp (90).
38.
Position cover (92) with cable (93) on former
(12). Install five screws (94) and washers (95).
Install screw (96), washer (95), plate (97), and
strap (84).
NOTE
Guard will be removed prior to
installation. It is temporarily installed
to prevent loss of hardware.
39.
Position bracket (98) between guard (87) and
former (12). Temporarily install two bolts (99 and
100), washers (101), and bracket (102).
40.
Install cable lock (103) on cable (93).
16-57
