TM 55-1520-240-23-9
11-98
INSTALL ROLL IDLER BELLCRANK
(Continued)
11-98
5.2.
Coat bushings (10.1 and 10.2) with epoxy primer
(E292). Install bushings in support (10).
6.
Position roll transducer (20) between lugs (19) of
bellcrank (10). Install bolt (18), two washers (17
and 16), and nut (15). Do not torque nut at this
time. Remove tag from transducer.
7.
Remove nut (21), two washers (22 and 23), and
bolt (24) from lugs (11) of bellcrank (10).
8.
Position roll input connecting link (25) between
lugs (11) of bellcrank (10). Install bolt (24), two
washers (23 and 22), and nut (21). Do not torque
nut at this time. Remove tag from link.
11-514