• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVE  PITCH  IDLER  BELLCRANK (Continued) - TM-55-1520-240-23-9_534
INSTALL  PITCH  IDLER  BELLCRANK (Continued)

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  508    509    510    511    512  513  514    515    516    517    518  
TM  55-1520-240-23-9 11-100 INSTALL PITCH  IDLER BELLCRANK 11-100 INITIAL  SETUP Applicable Configurations: All Tools: Aircraft  Mechanic’s Tool  Kit, NSN 5180-00-323-4692 Torque  Wrench,  0  to  150  Inch-Pounds Dial  Indicating  Scale,  0  to  10  Pounds Materials: Cleaning  Cloth  (E120) Dry  Cleaning  Solvent  (E162) Epoxy  Primer (E292) Gloves  (E184.1) Parts: Cotter Pins Personnel  Required: Medium  Helicopter Repairer Inspector References: TM  1-1520-253-23 TM  55-1520-240-23P Task  1-13 General Safety Instructions: Epoxy  primer  (E292) is  flammable and  toxic.   It  can  irritate  skin  and cause  burns.  Use  only with  adequate ventilation,  away  from  heat  and open  flame.  Avoid  contact  with  skin, eyes,  or clothing.  In  case  of contact, immediately flush  skin  or eyes  with water  for  at  least 15 minutes.   Get medical  attention  for eyes. Dry  cleaning  solvent  (E162)  is combustible  and  toxic.  Avoid  contact with  skin,  eyes,  or  clothing.   Use only with  adequate  ventilation,  away from  open  flame.  In  case  of  contact, immediately flush  skin  or eyes  with water  for  at  least 15 minutes.   Get medical  attention  for eyes. 11-519







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.