TM 55-1520-240-23-9
11-97
REMOVE ROLL IDLER BELLCRANK
(Continued)
11-97
8.
Tag roll input connecting link (18). Remove cotter
pin (19), nut (20), two washers (21), and bolt
(22) from bellcrank (7). Disconnect link from
bellcrank.
9.
Install bolt (22), two washers (21), and nut (20)
loosely in bellcrank (7).
10.
Tag roll transducer (23). Remove cotter pin
(24), nut (25), two washers (26), and bolt (27)
from bellcrank (7). Disconnect transducer from
bellcrank.
11.
Install bolt (27), two washers (26), and nut (25)
loosely in bellcrank (7).
12.
Remove two cotter pins (28), two nuts (29), four
washers (30), and two bolts (31) from support
(32). Remove bellcrank (7) from support.
13.
Install two bolts (31), four washers (30), and two
nuts (29) loosely in support (32).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-511