TM 55-1520-240-23-4
5-61
INSTALL CENTRIFUGAL DROOP STOP SUPPORT AND BLOCKS
(Continued)
5-61
2.
Have helpers lift and support blade (1).
3.
Prime contact surfaces of mounting plate (3) and
striker block (4). Use epoxy primer (E292). Wear
gloves (E184.1).
NOTE
Install screws before primer dries.
4.
Position block (4), with cutout (5) up, in keyway
(6) of plate (3). Install two screws (7). Torque
screws to 70 inch-pounds. Lockwire screws.
Use lockwire (E229).
5-262