REMOVE CENTRIFUGAL DROOP STOP SUPPORT AND BLOCKS
Remove lockwire and two screws (9) from
interposer block (6). Remove interposer block.
Remove interposer support (10) as follows:
Remove two locking nuts (13) and washers
Remove interposer support (10).
Remove lockwire and two screws (16).
Striker block must be removed straight
out, away from mounting plate. Striker
block key can be damaged by removal
in any other direction.
Remove striker block (17) straight out from
keyway (18) in mounting plate (19). Tap edge
of striker block from mounting plate side. Use
aluminum or phenolic drift.
END OF TASK