TM 55-1520-240-23-9
11-235
INSTALL TUNNEL FORWARD CONNECTING LINKS
(Continued)
11-235
FLIGHT SAFETY PARTS
This is an installation critical flight
safety part. All aspects of its assembly
and installation must be ensured.
Ensure that both rod end jam nuts are
installed and torqued.
Ensure that the rivet through the fixed
rod end insert and rod end bearing
is secure.
Ensure rivet, roll pin, and associated
hardware through rod end insert at
adjustable end of link assy is secure.
Ensure that the bonding jumper clamp
is installed and properly located.
Ensure proper application of ALBI fire
retardant coatings to the link assy.
Ensure proper attaching hardware
(impedance type bolt, nut, and
washers) is installed including
verification of bolt head orientation,
torque, and installation of cotter pins.
Loose attachments within flight control
primary linkage will degrade aircraft
control. Missing components will
cause loss of control.
FLIGHT SAFETY PARTS
This is an installation critical flight
safety part. All aspects of its assembly
and installation must be ensured.
Ensure that both rod end jam nuts are
installed and torqued.
Ensure that the rivet through the fixed
rod end bearing is secure.
Ensure that the bonding jumper clamp
is installed and properly located.
Ensure proper application of ALBI fire
retardant coatings to the link assy.
Ensure proper attaching hardware
(impedance type bolt, nut, and
washers) is installed including
verification of bolt head orientation,
torque, and installation of cotter pins.
Loose attachments within flight control
primary linkage will degrade aircraft
control. Missing components will
cause loss of control.
11-915
