TM 55-1520-240-23-9
11-235
INSTALL TUNNEL FORWARD CONNECTING LINKS
11-235
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 150 Inch-Pounds
Materials:
Alodine (E65)
Epoxy Primer (E292.1)
Abrasive Paper (E11)
Gloves (E184.1)
Sealant, Type 2, Class B-1/2 (E342.1)
Dry Cleaning Solvent (E162)
Cloths (E120)
Parts:
Cotter Pins
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
Epoxy primer (E292.1) is flammable
and toxic. It can irritate skin and
cause burns. Use only with adequate
ventilation, away from heat and
open flame. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Dry cleaning solvent (E162) is
combustible and toxic. Avoid contact
with skin, eyes, or clothing. Avoid
inhaling. Use only with adequate
ventilation, away from open flame. In
case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
Alodine (E65) is an oxidizer. Discard
cloths which contain this material in a
seperate container. If discarded with
cloths contaminated with acetone,
MEK, or other organic solvents,
combustion can result. In case of
contact, immediately flush skin or eyes
with water for at least 15 minutes.
Get medical attention for eyes.
Sealant (E342.1) can irritate skin and
cause burns. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
11-914
